| |
OK Flux 10.82 SAWType Acid
Acid, agglomerated flux designed for fillet, lap and butt welding, providing excellent tolerance of rust and mill scale with horizontal fillets up to 8 mm leg size without undercut or rollover. Suitable for DC single- and twin-arc wire welding systems at currents of up to 1,000 A. It is used for welding LPG bottles, water heater tanks, rail cars, ship's plate and structural steel.
Density approx. 1,20 kg/dm3
Basicity index 0,6
| Classifications | | SFA/AWS A5.17 | F7A2-EL12 | | | S 46 0 AR S2 | | EN 756 | S 42 0 AR S1 | | EN 760 | SA AR 1 86 AC | | | F7P2-EL12 | | | F7A0-EM12 |
|
OK Autrod 12.10| Classifications | | EN 756 | S 42 0 AR S1 | | SFA/AWS A5.17 | F7A2-EL12.F7P2-EL12 |
| Approvals | | ABS | 1YM | | BV | 1YM | | DNV | 1YM | | GL | 1YM | | VdTÜV | . |
| Typical all weld metal composition | | C | 0,06 | | Si | 0,6 | | Mn | 1,1 | | Cr | - | | Ni | - | | Mo | - |
| Typical properties all weld metal | | Yield stress, MPa | 480 | | Tensile strength, MPa | 550 |
| Test temps, °C | Impact values, J | | 0 | 80 | | -20 | 35 |
|
OK Autrod 12.20| Classifications | | EN 756 | S 46 0 AR S2 | | SFA/AWS A5.17 | F7A0-EM12 |
| Approvals | | ABS | 1YM | | BV | 1YM | | DNV | 1YM | | GL | 1YM | | VdTÜV | . |
| Typical all weld metal composition | | C | 0,07 | | Si | 0,7 | | Mn | 1,25 | | Cr | - | | Ni | - | | Mo | - |
| Typical properties all weld metal | | Yield stress, MPa | 510 | | Tensile strength, MPa | 590 |
| Test temps, °C | Impact values, J | | 0 | 100 | | -20 | 55 |
|
|
|