| |
FILARC 48
SMAW
Welding current, A
DC-, AC OCV 65 V
|
 |
| Classifications | Approvals | Typical all weld metal composition | Typical properties all weld metal | | SFA/AWS A5.1 | | E6013 | | EN ISO 2560-A | | E 42 0 RC 11 |
| | ABS | 2 | |
| BV | 2 | |
| DB | 10.105.06 | |
| DNV | 2 | |
| DS-EN 499 | E 42 0 R 11 | |
| GL | 2Y | |
| LR | 2 | |
| RS | 2Y | |
| VdTÜV | 03086 | |
| CE | EN 13479 | |
| | C | 0,08 | | Si | 0,5 | | Mn | 0,6 | | P | ³0,03 | | S | ³0,03 |
| Recovery
95%
Yield stress, MPa
>430
Tensile strength, MPa
510-570
Elongation, %
>24
Elongation, %
>24
| Charpy V | | Test temps, °C | Impact values, J | | 0 | >47 | | -20 | >28 |
|
| Diameter, mm | 2,0 | 2,5 | 3,2 | 4,0 | 5,0 | | Length, mm | 300 | 350 | 350 | 350 | 350 | | Arc voltage, V | 65 | 65 | 65 | 65 | 65 | | Welding current, A | 25-60 | 60-90 | 90-140 | 110-185 | 150-240 | | N. Kg weld metal/kg electrodes | - | 0,62 | 0,59 | 0,58 | - | | B. No. of electrodes/kg weld metal | - | 91 | 59 | 40 | - | | H. Kg weld metal/hour arc time | - | 0,8 | 1,1 | 1,4 | - | | T. Burn-off time, secs/electrode | 45 | 50 | 57 | 64 | 67 | | Deposition rate kg weld metal/hour | 0,5 | 0,7 | 1,2 | 1,5 | 2,2 |
|
|