| |
OK Tubrod 14.00S
SAW
Type Metal-cored
OK Tubrod 14.00S is a tubular wire designed for the submerged arc welding of mild and medium tensile steels and is suitable for fillet and multi-pass butt joints. Used in conjunction with OK Flux 10.71 exceptional productivity can be achieved at deposition rates up to 20% higher than with same size of solid wire at the same current.
Welding current, A
DC+
|
   |
| Classifications | Approvals | Typical all weld metal composition | Typical properties all weld metal | | SFA/AWS A5.17 | | F7A2-EC1 | | EN 756 | | S 42 2 AB T3 |
| | ABS | 3M, 3YM | |
| BV | A3YM | |
| DB | 52.039.13 | |
| DNV | III YM | |
| GL | 3YM | |
| LR | 3M, 3YM | |
| VdTÜV | 9143 | |
| UDT | Approved | |
| CE | EN 13479 (10.71) | |
| | Yield stress, MPa
450
Tensile strength, MPa
530
Elongation, %
30
Elongation, %
30
| Charpy V | | Test temps, °C | Impact values, J | | -20 | 120 |
|
| Diameter, mm | 2,4 | 3,0 | 4,0 | | Arc voltage, V | 28-38 | 28-40 | 28-40 | | Welding current, A | 250-450 | 400-700 | 500-850 | | Wire feed, m/min | 2,0-5,0 | 2,5-5,5 | 2,0-5,0 |
|
|