OK 48.00
SMAW
Type Basic

A reliable, general purpose, LMA electrode for mild and low-alloy steels. OK 48.00 deposits a tough, crack-resistant weld metal. High welding speed in the vertical-up position. OK 48.00 is insensitive to the composition of the base material within rather wide limits. The electrode can be used for welding structures where difficult stress conditions cannot be avoided.
Welding current, A
DC+(-)


ClassificationsApprovalsTypical all weld metal compositionTypical properties all weld metal
SFA/AWS A5.1
E7018
EN ISO 2560-A
E 42 4 B 42 H5
ABS3H5, 3YH5
DB 10.039.12
DNV3 YH5
GL3Y H5
LR3, 3Y H5
VdTÜV00690
CEEN 13479
C0,06
Si0,5
Mn1,2
P³0,02
S0,015
Redrying temperature, °C
350
Redrying time, hours
2
Recovery
125%
Yield stress, MPa
445
Tensile strength, MPa
540
Elongation, %
29
Elongation, %
29
Charpy V
Test temps, °CImpact values, J
-20140
-4070

Diameter, mm1,62,02,53,23,24,04,05,05,06,07,0
Length, mm 300 300 350 350 450 350 450 350 450 450 450
Arc voltage, V 24 22 23 22 23 24 26 23 23 23 25
Welding current, A 30-55 50-80 80-110 90-140 90-140 125-210 125-210 200-260 200-260 220-340 280-410
N. Kg weld metal/kg electrodes 0,59 0,63 0,65 0,64 0,64 0,51 0,67 0,53 0,69 0,72 0,72
B. No. of electrodes/kg weld metal 192 119 62,5 43 32,3 35,0 20,5 23,0 13,5 9,6 7,0
H. Kg weld metal/hour arc time 0,38 0,6 1,0 1,3 1,5 2,1 2,1 2,6 2,6 3,7 4,4
T. Burn-off time, secs/electrode 50 50 56 66 76 64 86 78 102 102 117

 

Vorige pagina