| |
OK Autrod 16.10
GMAW
A stainless ''ER308L'' electrode for the GMAW of corrosion-resistant steels containing approximately 19Cr10Ni and austenitic corrosion-resistant steels such as AISI 301, 304, 304L. OK Autrod 16.10 is usually welded with Ar/(1-3%)O2 as the shielding gas.
Welding current, A
DC+
|
 |
| Classifications | Approvals | Typical all weld metal composition | Typical properties all weld metal | | EN 12072 | | S 19 9 L | | SFA/AWS A5.9 | | ER308L | | Werkstoffnummer | | ~1.4316 |
| | | C | <0,03 | | Si | 0,5 | | Mn | 1,8 | | Cr | 20,2 | | Ni | 10,0 | | Mo | <0,3 | | Cu | <0,3 | | Wire composition |
| Yield stress, MPa
450
Tensile strength, MPa
620
Elongation, %
36
Elongation, %
36
| Charpy V | | Test temps, °C | Impact values, J | | +20 | 110 | | -60 | 90 | | -196 | 60 |
|
| Diameter, mm | 0,8 | 1,0 | 1,2 | | Arc voltage, V | 15-24 | 15-28 | 14-28,5 | | Welding current, A | 55-160 | 80-240 | 100-300 | | Wire feed, m/min | 4,0-17,0 | 4,0-16,0 | 3,0-14,0 | | Deposition rate kg weld metal/hour | 0,9-4,1 | 1,5-6,0 | 1,6-7,5 |
|
|