ESAB YardFeed 200

Sturdy and reliable
Sturdy design with galvanised metal casing made of high strength steel for use in tough environments. Protective frame made of steel tubes protect controls, quick connectors, cable sockets and torch connector during transport and operation in confined areas The protective frame also acts as the handle and is insulated from the chassis which is equipped with plastic rails for easy movement. Electronically controlled feeding gives accurate and stable arc. The 4-wheel feeder mechanism with grooves in both feed roll and pressure roll gives stable feeding and low wear on the wire, all to avoid operational disturbances.
The feeder is available with Ø30 mm feed rolls for wires up to Ø1.2 mm.
ESAB LogicPump ELP *, provides automatic start of the water pump when a water cooled gun is connected. This prevents overheating of the welding torch.

With safety in mind
Designed to meet the most rigid safety standard IEC 60974-5 with low voltage (42 V/AC) operations and overload protection to eliminate breakdowns. The feeder is equipped with a safety switch where the operator can deactivate the torch trigger. The safety switch can connect power to an optional heating element during night time to protect the wire spool against humidity.

FlexibilityThe control panel (M13y) is easy to operate with accurate settings that suits different needs and demands. ESAB YardFeed 200 is equipped with a receptacle for easy and reliable hook up of the interconnection cable. Strain relief for the welding torch and a gas flow manometer are available as accessories.

Panel (MMC) functions
Wire feed speed
2/4 stroke
Adjustable burn-back time (inside the cabinet)
Manual valve for gas flow (inside the cabinet)
Gas purge
Wire inching
Digital V/A meter (Optional version)





Easy service and maintenance
The feeder mechanism is easy to access and all wear parts can be exchanged without tools. One single pressure device makes it easy to adjust the appropriate feeding pressure.
• 2/4 stroke, simplifies handling of the welding torch.
• Safety switch with optional heating element
• Gas purge
• Wire inching
• Manual gas flow valve inside the cabinet
• Gas flow manometer incl.. manual valve (Option)
• High strength steel to make the feeder light and robust   especially resistant against rough handling
• Integrated handle in a protective frame simplifies the   handling through man-holes and other difficult to access areas.
• Equipped with military standard control cable connector
• ESAB designed brake hub with no unsecured parts
• Adjustable burn-back timer provides a smooth finish,   extends the lifetime of the contact tip and guarantee no   cracks at the end.
• Quick connectors- shortest possible set-up times.
• ESAB LogicPump ELP *, provides automatic start of water pump by connection of a water cooled welding gun.
• TrueArcVoltage SystemTM, measures the correct arc voltage value independent of the length of the connection cable, return cable or welding gun.

Technical data  
Power supply, Vac, Hz
Power requirement, VA
Wire spool capacity, kg
Max. spool diameter, mm
Wire feed speed, m/min
Burn-back timer, sec
Dimension incl.. frame (l x w x h), mm
Weight incl. frame, kg
Max permissible load at 60% d.c. A
Temperature working range
Enclosure class
Wire dimensions:
 stainless steel
 cored wire
2, 50/60
0 - 0.5
593 x 210 x 302
IP 23


Vorige pagina